Skip to product information
1 of 9

Mayrc Industrial

Mayrc 50A ESC Electric Speed Controller for Exercise Bike E-Bike

Mayrc 50A ESC Electric Speed Controller for Exercise Bike E-Bike

Regular price $163.79 USD
Regular price $192.70 USD Sale price $163.79 USD
Sale Sold out
Case


ESC 50A ESC Version
V4
Cont. Current 50A Max. Current 240A
Input Volt 3-12S PCB Size 60mm*40mm
Firmware Updatable Hardware V4.12
BEC 5V/1.5A Compatible Motor Sensored & Sensorless
Accessory With USB Cable Capacitors 3pcs 680μf 63V

Application: E-bike, Electric Exercise Bike, etc.


Using Tips:

  1. When you receive the ESC, please test without load and do not connect motor, first check if the ESC can successfully connect to your computer, if ok, then connect to motor and you can start to adjust parameters.
  2. Do not use switching power supply, the instant voltage when switching power supply connect to ESC is very high, which would easy damage the ESC. 
  3. Do not push the throttle too hard when test without load, gently and slowly speed up.
  4. Be cautious when adjust parameters, if parameters set mistake, would also easy damage the ESC.
  5. Please must remember to change to corresponding modes when you adjust parameters. For example, the ESC default mode is BLDC mode.If you want to detect FOC mode and adjusted FOC parameters, please change to FOC mode. Or the ESC would easy to burn. 
  6. For V6 in FOC mode, ERPM can't over 50000, otherwise driver IC would easy to be damaged.
    ERPM= motor pole pairs number * KV * Voltage
  7. If you use UART port, the wire better do not over 0.5m or even shorter, and better use Stranded wire. 

 

View full details