Mayrc Industrial
Maytech MTSKR2005WF V2 Waterproof IP66 Remote Control Wireless Charging LED Screen for ESK8 DIY Electric Skateboard
Maytech MTSKR2005WF V2 Waterproof IP66 Remote Control Wireless Charging LED Screen for ESK8 DIY Electric Skateboard
Couldn't load pickup availability
Compared MTSKR1902WF and MTSKR2005WF
|
Model No. |
MTSKR1905WF |
MTSKR2005WF |
|
Waterproof |
IP67 double waterproof |
IP66 waterproof |
|
Control mode |
Esurf mode |
Esk8 mode |
new ESK8 mode |
|
Application |
Electric-surfboard/Efoil; Underwater control; |
E-skateboard |
ESK8 |
|
Throttle display |
0-100% |
±100% |
±100% |
|
Cruise control |
Yes |
No |
No |
|
Speed display |
No |
Yes |
Yes |
|
Travel distance |
No |
Yes |
Yes |
|
Charger |
QC 2.0 Wireless |
|
Wireless frequency |
2.4GHz wireless with 40 Channel |
|
Display screen |
OLED Yellow and Blue |
|
Voltage display |
Remote and Main Battery Voltage Level（Lithium iron/lithium ion battery optional） |
|
Triggers |
2 x High sensitivity triggers |
|
Throttle output |
PWM 1ms-2ms 100Hz |
|
Telemeter Data by Recevicer |
Motor RPM/Main Battery Voltage |
|
Telemeter Data by VESC |
ESC voltage/current/temperature/Motor temperature/RPM |
|
Compatible ESCs |
VESC4/VESC6/FOCBOX/Other PWM ESCs |
|
VESC control mode |
Duty Cycle / Current Mode |
|
Receiver's built-in switches for esk8 lights, esurf water pump using, etc |
1 x 30V 3A mechanical relay switch 1 x 20V 2A transistor electronics switch |
Tips for Usage:
1. This remote only has Esk8 mode, and it's just normal waterproof, can only work for electric skateboard, please do not use for Esurf.
2. The receiver is not waterproof, please keep the receiver away from water, otherwise the receiver would easy to have short circuit problem.
3. Please attention when weld wire on the receiver or when using, each 2 pins do not touch each other, otherwise would easy to burn the receiver.
Related Product:
Maytech Fully Waterproof Electric Surfboard/Efoil Remote
