MAYRC 50V Dual VESCTOOL Upgradable Speed Controller for Elongboard Electric Vehicles
MAYRC 50V Dual VESCTOOL Upgradable Speed Controller for Elongboard Electric Vehicles
Specification:
| Model： | MTSPF7.5D |
| With Aluminum Case： | NO |
| Cont. Current： | 50A each side 2pcs VESCs in one board |
| Input Volt.： | 11.1-50V |
| Hardware： | Based on V7.5 |
| Firmware： | Upgradable |
| Software： | VESCTOOL Compatible |
| FOC： | YES; Better than V4.12 |
| Compatible motor： | Sensor or sensorless |
| Weight： | 160g |
Notice：
1. Never connect one reclever to two or more V6/V75 based SUPERFOC ESCs or VESCs in an array! Permanent damage may result from Y-PPM wiring.
2. Only connect CAN L and CAN H ! GND pins and 5V should never be connected in a V6/V75 based SUPERFOC ESCs or VESC array.
