In Stock Kill Switch Protector with Wristband for Efoil Esurf Compatible with MTSKR1905WF V3 Remote VESC/ESCs
Related Products:
If you want to use other cheaper but slower shipping method, please contact shelly@mayrc.com
Shipping time by DHL or UPS is fast, normally 3-7 days arrive to you.
| Model No | MTSS1905WF |
| Compatible Remote | MTSKR1905WF / MTSKR2005WF |
| Compatible Controllers | VESC / MTSF-WP32 ESCs that support PWM signal |
| Application | foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, etc., |
Product 1: Kill switch:
> Check Video Using Instruction
> Check the way to install your ESC/VESC with the switch
Update from July 22nd, 2026:
Supports independent PWM communication cutoff for 3 channels, which means can simultaneously cut off max 3 motor and ESCs.
If you need to use 2 or 3 motor and ESCs, this kill switch is good option for you, only need 1pcs kill switch.
When work with the MTSKR1905WF Remote and Maytech MTSF-WP32 ESCs/VESCs, TX and RX chips can be directly plugged into this PCB for real-time data transmission, eliminating the need for soldering additional wires.
Product 2: MTSKR1905WF Remote:
> Get E-Manual: Remote Manual and Instruction
> Check Video Using Instruction
The remote has 2 Modes, signal output pulse width is different in 2 modes:
- Esurf Mode is 1ms-2ms, no stop no brake, if you use Esurf mode to work with VESCTOOL compatible controller, please use below settings in VESCTOOL and to match with the remote:
PPM Control Type: Current no reverse
PPM Mapping: Pulselength Start: 1.1ms; Pulselength End: 1.9ms; Pulselength Center: 1.5ms
Or you can use wizard mode to detect compatible value.
- Esk8 Mode is 1.5ms-1ms (Brake), 1.5ms-2ms (Speed up), 1.5ms is stop position.
Please noted to match compatible parameters for different modes in VESC_TOOL.
Tips After Using:
Tips After Using:
Related Products:
Foil Assist Kits:
